Model No.: PR-FR4-1
PCB raw materials FR4 /G10 sheet
This product is a kind of laminated board formed through heat pressing after the electric industry fiolax cloth dips into epoxy resin. It is suitable as the mechanical, electric and electronic insulation structural components which are used under room and middle temperatures with a certain mechanical performance and electric performance requirement.
-Excellent mechnical strength
-Good insulation function
-High temperature resistant
-Good ablity against acid ,alkali and solvent
-Hard and durable
-Good adhesive properties in the surface
Technical Data Sheet
|Technical Data||Method of Verification||Unit||3240|
|Water absorption 24hrs||ISO 62||%||0.05~0.15|
|Max. service temperature -Short term||ISO 75-2||ºC||/|
|Max. service temperature - Long term||ISO 75-2||ºC||130~140|
|Coefficient of Thermal Expansion-LW||ISO 11359||m/K||/|
|Coefficient of Thermal Expansion-CW||ISO 11359||m/K||/|
|Thermal Conductivity||ISO 11359||W/(m·K)||2.2~2.5|
|Tensile strength at yield||ISO 527-2||MPa||≥220|
|Tensile strength at break||ISO 527-2||Mpa||/|
|Hardness Rockwell||DIN 53505||120-125|
|Izod impact strength||ISO 179||kJ/m2||≥33|
|Bending Strength||ISO 527-2||Mpa||/|
|Flexural strength-LW||ISO 179||Mpa||≥314|
|Flexural strength-CW||ISO 179||Mpa||≥216|
|Adhesive Strength||ISO 179||N||5600|
|Compression strength-LW||ISO 179||Mpa||≥350|
|Compression strength-CW||ISO 179||Mpa||≥147|
|Volume resistively||IEC 60093||Ohm (Ω) * cm||1.3x1014|
|Surface resisively||IEC 60093||Ohm (Ω)||3.5x1012|
|Electric strength- LW||VDE 0303||kV/mm||≥14.2|
|Breakdown Voltage-CW||VDE 0303||kV||>34|
|Relative dielectric coefficient||VDE 0303||/||≤4.7|
|Dielectric Loss mudule||VDE 0303||50HZ||≤0.04|
|Arc resistance||VDE 0303||S||/|
|NOTE: 1 g/cm3 = 1,000 kg/m3, 1 Mpa = 1 N/mm2, 1kV/mm = 1 MV/m|
Contact us if you need more details on Fr4 Sheet. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Fiber Glass Sheet、Glass Fiber Sheet. If these products fail to match your need, please contact us and we would like to provide relevant information.
July 25, 2011, approved by the Ministry of Industry and Information Technology of the People's Republic of China on the Issuance of '2011 Circular on the Revision of the Second Batch of Industry Standards' [Ministry of Industry and Information Technology  No. 134] Materials, such as technical requirements...
Basic Information Product Name : LCD Nc dry box Product Model : SD-060 Outside Size(mm) : L330*W330*H570 Capacity(L) : 60 Color : Black Guarantee: 5 years Details Product features: 1, The cabinet body is made of 0.8 mm thick cold-rolled steel...
There are two kinds of raw materials for Caisha Epoxy Floor: color quartz sand and colored sand epoxy resin. The selection of raw materials for Caisha Epoxy Floor is stressful. Colored sand is used for colored sand, which not only gives the floor a beautiful decorative performance, but also guarantees the high compressive...
North American PCB orders shipment ratio (BB) was flat: In October, the North American PCB order shipment ratio (industry leading indicator) was 0.99, which was flat compared with the previous month. It shows that the downstream demand is still not strong and the overall prosperity of the industry is still not high. Among...
Product Categories : FR4 Fiber Glass Sheet
Premium Related Products