Model No.: PR-HDPE-1
Cutting Board High Density Hdpe Sheet
HDPE, the full name is high density polyethylene. The higher density improves its tensile strength ,surface hardness and heat deflection temperature. It is widely used because of its good impact resistance, nice chemical resistance, low water absorption and good resistance to UV.
-Good fatigue and wear resistance
-Super low water absorption
-Good surface smoothness
-Good protection against stress cracking
-Low steam permeability
-Good electrical insulation
1.Furnitures, doors ,windows ,chopping boards
2.Water storage box
Technical Data Sheet
|Water absorption 24hrs||ISO 62||%||0.01|
|Heat deflection temperature - HDT/A||ISO 75-2||ºC||55|
|Min. service temperature||ºC||-30|
|Max. service temperature-Long Term||ºC||90|
|Thermal conductivity at 23 ºC||DIN 11359||W/(K*m)||0.42|
|Coefficient of linear thermal expansion||ISO 11359||10-4*K-1||1.5|
|Flammability Rating(6mm thickness)||UL 94||-||HB|
|III.Mechanical Properties at 23ºC|
|Tensile strength at yield||ISO 527-2||MPa||27|
|Tensile strength at break||ISO 527-2||Mpa||35|
|Elongation at break||ISO 527-2||%||700|
|Modulus of elasticity after tensile test||ISO 527-2||MPa||1,000|
|Modulus of elasticity after flexural test||ISO 178||MPa||1,000|
|Hardness - Shore D||DIN 53505||64|
|Charpy impact strength||ISO 179||kJ/m2||N. B.|
|Friction coefficient||DIN 53375||0.3|
|IV.Electrical Properties at 23ºC|
|Dielectric constant at 1 MHz||IEC 60250||106Hz||2.3|
|Dielectric loss factor at 1 MHz||IEC 60250||106Hz||3.1|
|Volume resistively||IEC 60093||Ohm (Ω) * cm||>1016|
|Surface resisively||IEC 60093||Ohm (Ω)||>1015|
|Dielectric strength||IEC 60243-1||kV/mm||17|
|NOTE: 1 g/cm3 = 1,000 kg/m3, 1 Mpa = 1 N/mm2, 1kV/mm = 1 MV/m|
|Property data contained herein are typical values of resin for your reference and comparison purposes only. PRIOR will not provide any legally binding guarantee of certain properties, or any suitability.|
Contact us if you need more details on High Density Pe Sheet. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Pe Sheet、HDPE Sheet. If these products fail to match your need, please contact us and we would like to provide relevant information.
Model NO.: CK-R-073 Application: General & Special Use Mfi(G/10min): 2 Granule Diameter: 2.5mm Property: Plastic Raw Material Trademark: CADIT Transport Package: Plastic Bag Specification: 25kg/bag Origin: Guangdong, China HS Code: 3901200090 Recycled Plastic granules PE with high density HDPE MasterbatchGrade:1. Blow...
Model NO.: 35kV Certification: CE, ISO9001 Color: Gray or White Brand: NJREC or OEM Trademark: NJREC Origin: China HS Code: 85462090 High-density polyethylene insulator(HDPE insulator) or molded insulator can used in overhead electrical distribution system, compacted or conventional distribution aerial nets. It suits for...
Model NO.: 1.0mm thickness Standard: ASTM Certificate: Tri Quality: Virgin Product Name: HDPE Liner Key Word: Geomembrane Width: 8m Length: 50m-100m Trademark: Tianhai Transport Package: as Client Request Specification: 8m x 100m Origin: China HS Code: 3920109090 Product description High Density Polyethylene (HDPE)...
Model NO.: TH-001 0.75mm/30mils thickness Standard: ASTM Certificate: Tri Quality: Virgin Product Name: HDPE Geomembrane Key Word: Geomembrane Width: 8m Length: 50m-100m Thickness: 1.5mm Usage: Farming Pond Sample: Free Trademark: Tianhai Transport Package: as Client Request Specification: 8m x 100m Origin: China HS Code:...
Product Categories : HDPE Sheet&Rod