Find Hdpe Sheet, Pe Sheet, High Density Pe Sheet on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Home > Products > HDPE Sheet&Rod > Polyethylene HDPE Sheets/Extruded HDPE Sheets

Polyethylene HDPE Sheets/Extruded HDPE Sheets

Basic Info

Model No.:  PR-HDPE-1

Product Description

Model NO.: PR-HDPE-1 Kind: Engineering Plastic Sheet Contraction Percentage: <0.4% Thickness: 1-100mm Fob Port: Shenzhen Small Order: Accepted Trademark: PRIOR Specification: SGS, RoHS HS Code: 3920109090 Material: PE Water Absorption: <0.01% Tensile Strength: (30~40)MPa Size: 1000*2000mm Sample Availability: Yes Density: 0.95~0.96g/cm3 Transport Package: by Plastic Pallet or Wooden Pallet Origin: China
Polyethylene HDPE Sheets/extruded HDPE Sheets

Description
HDPE, the full name is high density polyethylene. The higher density improves its tensile strength ,surface hardness and heat deflection temperature. It is widely used because of its good impact resistance, nice chemical resistance, low water absorption and good resistance to UV.

Characteristics
-Good fatigue and wear resistance
-Super low water absorption
-Cold resistant
-Good surface smoothness
-Good protection against stress cracking
-Low steam permeability
-Good electrical insulation
-Environmental friendly
-Recyclable

HDPE Applications
1.Furnitures, doors ,windows ,chopping boards
2.Water storage box 
3.Playground barriers




Technical Data Sheet
PROPERTIES Test Method Unit Value
I.Physical Properties
Density ISO 1183 g/cm3 0.95~0.96
Water absorption 24hrs ISO 62 % 0.01
II.Thermal Properties
Heat deflection temperature - HDT/A ISO 75-2 ºC 55
Min. service temperature   ºC -30
Max. service temperature-Long Term   ºC 90
Thermal conductivity at 23 ºC DIN 11359 W/(K*m) 0.42
Coefficient of linear thermal expansion ISO 11359 10-4*K-1 1.5
Flammability Rating(6mm thickness) UL 94 - HB
III.Mechanical Properties at 23ºC
Tensile strength at yield ISO 527-2 MPa 27
Tensile strength at break ISO 527-2 Mpa 35
Elongation at break ISO 527-2 % 700
Modulus of elasticity after tensile test ISO 527-2 MPa 1,000
Modulus of elasticity after flexural test ISO 178 MPa 1,000
Hardness - Shore D DIN 53505   64
Charpy impact strength ISO 179 kJ/m2 N. B.
Friction coefficient DIN 53375   0.3
IV.Electrical Properties  at 23ºC
Dielectric constant at 1 MHz IEC 60250 106Hz 2.3
Dielectric loss factor at 1 MHz IEC 60250 106Hz 3.1
Volume resistively IEC 60093 Ohm (Ω) * cm >1016
Surface resisively IEC 60093 Ohm (Ω) >1015
Dielectric strength IEC 60243-1 kV/mm 17
NOTE: 1 g/cm3 = 1,000 kg/m3, 1 Mpa = 1 N/mm2, 1kV/mm = 1 MV/m
       
Statement:      
Property data contained herein are typical values of resin for your reference and comparison purposes only. PRIOR will not provide any legally binding guarantee of certain properties, or any suitability. 


 

Contact us if you need more details on Hdpe Sheet. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Pe SheetHigh Density Pe Sheet. If these products fail to match your need, please contact us and we would like to provide relevant information.
  • Corrugated Floor Sheets Profile Decking Sheets

    Model NO.: 720 Standard: ASTM, GB Surface Treatment: Galvanized Application: Ship Plate, Container Plate, Flange Plate Stock: Not Stock Transport Package: Seaworthy Packing Origin: China Type: Steel Plate Certification: ISO Technique: Cold Rolled Special Use: High-strength Steel Plate Trademark: OEM Specification: 720 HS...

  • C. R Coils Sheets H. R Coils Sheets Gp Coils Sheets Slitting Machine

    Model NO.: C.R coils sheets H.R coils sheets GP coils sheets Coil Weight: 25-35t Overseas Service: Lifetime Max Speed: 10-250m/Min Package: Naked Package and Fixed in The Container Trademark: Wuxi Longar Transport Package: Naked But Fixed in The Container Origin: China  Product FeatureMain Techical ParametersMachine...

  • High Purity Polished 99.95% Molybdenum Square Plates/Sheets or Tungsten Sheets/Plates

    Model NO.: Mo-1 Standard: GB, ASTM Alloy: Non-alloy Powder: Not Powder Dimensions: as Required Trademark: DINGDING Specification: ISO9001: 2008 HS Code: 8102950000 Application: Electronics, Industrial, Medical, Chemical, Vacuum Furnace,Electrode Purity: >99.95% Type: Molybdenum Plate Density: 10.2g/cm3 Thickness:...

  • 55-60shore Brazil Slipper Design PE Foam Sheets Rubber EVA Sheets

    Model NO.: PE foam sheet Pattern: Style Hardness: 55-60shore Sample Charge: Sample Free Delivery Time: 10-15days Payment Term: 30%Deposit, 70%T/T Against Copy of B/L Specification: SGS & ISO Type: Outsole Thickness: 15mm Sample Time: 3-5days Freight Charge: Freight Collection MOQ: 200sheets/Color Trademark: As customer...

Product Categories : HDPE Sheet&Rod

Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters