Find Hdpe Sheet, Pe Sheet, High Density Pe Sheet on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Home > Products > HDPE Sheet&Rod > Wear Resistant Plastic Engineering Board PE Plate

Wear Resistant Plastic Engineering Board PE Plate

Basic Info

Model No.:  PR-HDPE-1

Product Description

Model NO.: PR-HDPE-1 Kind: Engineering Plastic Sheet Contraction Percentage: <0.4% Thickness: 1-100mm Fob Port: Shenzhen Small Order: Accepted Trademark: PRIOR Origin: China Material: PE Water Absorption: <0.01% Tensile Strength: (30~40)MPa Size: 1000*2000mm Sample Availability: Yes Density: 0.95~0.96g/cm3 Specification: SGS, RoHS HS Code: 3920109090
Wear resistant plastic engineering board PE plate

Description
HDPE, the full name is high density polyethylene. The higher density improves its tensile strength ,surface hardness and heat deflection temperature. It is widely used because of its good impact resistance, nice chemical resistance, low water absorption and good resistance to UV.

Characteristics
-Good fatigue and wear resistance
-Super low water absorption
-Cold resistant
-Good surface smoothness
-Good protection against stress cracking
-Low steam permeability
-Good electrical insulation
-Environmental friendly
-Recyclable

HDPE Applications
1.Furnitures, doors ,windows ,chopping boards
2.Water storage box 
3.Playground barriers




Technical Data Sheet
PROPERTIES Test Method Unit Value
I.Physical Properties
Density ISO 1183 g/cm3 0.95~0.96
Water absorption 24hrs ISO 62 % 0.01
II.Thermal Properties
Heat deflection temperature - HDT/A ISO 75-2 ºC 55
Min. service temperature   ºC -30
Max. service temperature-Long Term   ºC 90
Thermal conductivity at 23 ºC DIN 11359 W/(K*m) 0.42
Coefficient of linear thermal expansion ISO 11359 10-4*K-1 1.5
Flammability Rating(6mm thickness) UL 94 - HB
III.Mechanical Properties at 23ºC
Tensile strength at yield ISO 527-2 MPa 27
Tensile strength at break ISO 527-2 Mpa 35
Elongation at break ISO 527-2 % 700
Modulus of elasticity after tensile test ISO 527-2 MPa 1,000
Modulus of elasticity after flexural test ISO 178 MPa 1,000
Hardness - Shore D DIN 53505   64
Charpy impact strength ISO 179 kJ/m2 N. B.
Friction coefficient DIN 53375   0.3
IV.Electrical Properties  at 23ºC
Dielectric constant at 1 MHz IEC 60250 106Hz 2.3
Dielectric loss factor at 1 MHz IEC 60250 106Hz 3.1
Volume resistively IEC 60093 Ohm (Ω) * cm >1016
Surface resisively IEC 60093 Ohm (Ω) >1015
Dielectric strength IEC 60243-1 kV/mm 17
NOTE: 1 g/cm3 = 1,000 kg/m3, 1 Mpa = 1 N/mm2, 1kV/mm = 1 MV/m
       
Statement:      
Property data contained herein are typical values of resin for your reference and comparison purposes only. PRIOR will not provide any legally binding guarantee of certain properties, or any suitability. 


 

Contact us if you need more details on Hdpe Sheet. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Pe SheetHigh Density Pe Sheet. If these products fail to match your need, please contact us and we would like to provide relevant information.
  • Changkui commerce ultra high strength wear-resistant steel plate was successfully developed

    The high-strength wear-resistant steel plate jointly developed by Changkui Business and related steel research institutes has been successfully implemented. This type of steel plate not only has high strength and high hardness, but also has excellent welding performance. All performance indicators have reached or exceeded...

  • Brass Bronze Copper Clad Steel Self-Lubricating Sliding Plate Wear Resistant Plate

    Trademark: FORHOME Specification: SGS ISO Origin: Hunan Changsha Brief introduction Material:Cladding metal new materials, wear metalsApplication:Metallurgical industry, Coal industry, Building materials industry, Electric power industry ,Loading equipments,Mining machinery, Glass industry, Tunnel machinery,Construction...

  • Xar400 Nm400 Ar400 Wnm400 Hardface Heat Wear Resistant Plate

    Model NO.: WNM400 A Special Use: Wear Resistant Steel Stock: Stock Good Quality: Competitive Price Width: 600mm-2500mm Length: Requirement Packaging Detail: as Customer′s Standard Payment Term: T/T; L/C; Western Union Delivery Time: Average 30 Days Trademark: WGCYL Transport Package: Bundle,Loose,Bare or According Customer...

  • Wear-Resisting Various Plastic Cutting Board for UHMWPE Panels

    Type: Thermosetting Plastic Pipe Color: White, Black, Yellow, Red, Blue Style: Solid Usage: Water Supply Trademark: DMC Transport Package: Exported Standard Specification: ISO9001, BV, CCS, ABS Origin: Shanghai, China DMC Industry Strengths: Solutions to Dredging & Marine & Mining & Conveyor 12 years export...

Product Categories : HDPE Sheet&Rod

Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters