Model No.: PR-HDPE-1
High density polyethylene Plate Hdpe Sheet
HDPE, the full name is high density polyethylene. The higher density improves its tensile strength ,surface hardness and heat deflection temperature. It is widely used because of its good impact resistance, nice chemical resistance, low water absorption and good resistance to UV.
-Good fatigue and wear resistance
-Super low water absorption
-Good surface smoothness
-Good protection against stress cracking
-Low steam permeability
-Good electrical insulation
1.Furnitures, doors ,windows ,chopping boards
2.Water storage box
Technical Data Sheet
|Water absorption 24hrs||ISO 62||%||0.01|
|Heat deflection temperature - HDT/A||ISO 75-2||ºC||55|
|Min. service temperature||ºC||-30|
|Max. service temperature-Long Term||ºC||90|
|Thermal conductivity at 23 ºC||DIN 11359||W/(K*m)||0.42|
|Coefficient of linear thermal expansion||ISO 11359||10-4*K-1||1.5|
|Flammability Rating(6mm thickness)||UL 94||-||HB|
|III.Mechanical Properties at 23ºC|
|Tensile strength at yield||ISO 527-2||MPa||27|
|Tensile strength at break||ISO 527-2||Mpa||35|
|Elongation at break||ISO 527-2||%||700|
|Modulus of elasticity after tensile test||ISO 527-2||MPa||1,000|
|Modulus of elasticity after flexural test||ISO 178||MPa||1,000|
|Hardness - Shore D||DIN 53505||64|
|Charpy impact strength||ISO 179||kJ/m2||N. B.|
|Friction coefficient||DIN 53375||0.3|
|IV.Electrical Properties at 23ºC|
|Dielectric constant at 1 MHz||IEC 60250||106Hz||2.3|
|Dielectric loss factor at 1 MHz||IEC 60250||106Hz||3.1|
|Volume resistively||IEC 60093||Ohm (Ω) * cm||>1016|
|Surface resisively||IEC 60093||Ohm (Ω)||>1015|
|Dielectric strength||IEC 60243-1||kV/mm||17|
|NOTE: 1 g/cm3 = 1,000 kg/m3, 1 Mpa = 1 N/mm2, 1kV/mm = 1 MV/m|
|Property data contained herein are typical values of resin for your reference and comparison purposes only. PRIOR will not provide any legally binding guarantee of certain properties, or any suitability.|
Contact us if you need more details on HDPE Sheet. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Pe Sheet、High Density Pe Sheet. If these products fail to match your need, please contact us and we would like to provide relevant information.
Model NO.: dn200-800 Brand Name: Sino East Thickness: En2.3-59.3mm Color: Black Stock: Yes Material: PE-Steel Strip-PE Technology of Plastic Composite Pipe: Internal and External Coating Internal Coating Materials of Plastic Composite Pipe: Inner Epoxy Outside Three-Decker Polyethylene Steel Pipe Plastic Composite Pipe...
In the first half of April, plastic raw material prices in the northeast, north, and northwest markets of China, low-density polyethylene, high-density polyethylene, linear low-density polyethylene, and polypropylene continued to rise, ABS gains slowed, and PVC narrowed in the low position. After the consolidation,...
Germany has successfully developed a new generation of high-density polyethylene - DH5273, DH5973. Its structural characteristics are that the molecular chain is non-polar and homogenous, and has excellent stability against acids, alkalis, electrolytes, solvents, greases, etc., and has a high resistance to environmental...
Model NO.: 35kV Certification: CE, ISO9001 Color: Gray or White Brand: NJREC or OEM Trademark: NJREC Origin: China HS Code: 85462090 High-density polyethylene insulator(HDPE insulator) or molded insulator can used in overhead electrical distribution system, compacted or conventional distribution aerial nets. It suits for...
Product Categories : HDPE Sheet&Rod