Find Hdpe Sheet, Pe Sheet, High Density Pe Sheet on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Home > Products > HDPE Sheet&Rod > China Plastic Engineering Industry HDPE Sheet

China Plastic Engineering Industry HDPE Sheet

Basic Info

Model No.:  PR-HDPE-1

Product Description

Model NO.: PR-HDPE-1 Kind: Engineering Plastic Sheet Contraction Percentage: <0.4% Thickness: 1-100mm Fob Port: Shenzhen Small Order: Accepted Trademark: PRIOR Origin: China Material: PE Water Absorption: <0.01% Tensile Strength: (30~40)MPa Size: 1000*2000mm Sample Availability: Yes Density: 0.95~0.96g/cm3 Specification: SGS, RoHS HS Code: 3920109090 China plastic Engineering industry Hdpe Sheet

Description
HDPE, the full name is high density polyethylene. The higher density improves its tensile strength ,surface hardness and heat deflection temperature. It is widely used because of its good impact resistance, nice chemical resistance, low water absorption and good resistance to UV.

Characteristics
-Good fatigue and wear resistance
-Super low water absorption
-Cold resistant
-Good surface smoothness
-Good protection against stress cracking
-Low steam permeability
-Good electrical insulation
-Environmental friendly
-Recyclable

HDPE Applications
1.Furnitures, doors ,windows ,chopping boards
2.Water storage box 
3.Playground barriers




Technical Data Sheet
PROPERTIES Test Method Unit Value
I.Physical Properties
Density ISO 1183 g/cm3 0.95~0.96
Water absorption 24hrs ISO 62 % 0.01
II.Thermal Properties
Heat deflection temperature - HDT/A ISO 75-2 ºC 55
Min. service temperature   ºC -30
Max. service temperature-Long Term   ºC 90
Thermal conductivity at 23 ºC DIN 11359 W/(K*m) 0.42
Coefficient of linear thermal expansion ISO 11359 10-4*K-1 1.5
Flammability Rating(6mm thickness) UL 94 - HB
III.Mechanical Properties at 23ºC
Tensile strength at yield ISO 527-2 MPa 27
Tensile strength at break ISO 527-2 Mpa 35
Elongation at break ISO 527-2 % 700
Modulus of elasticity after tensile test ISO 527-2 MPa 1,000
Modulus of elasticity after flexural test ISO 178 MPa 1,000
Hardness - Shore D DIN 53505   64
Charpy impact strength ISO 179 kJ/m2 N. B.
Friction coefficient DIN 53375   0.3
IV.Electrical Properties  at 23ºC
Dielectric constant at 1 MHz IEC 60250 106Hz 2.3
Dielectric loss factor at 1 MHz IEC 60250 106Hz 3.1
Volume resistively IEC 60093 Ohm (Ω) * cm >1016
Surface resisively IEC 60093 Ohm (Ω) >1015
Dielectric strength IEC 60243-1 kV/mm 17
NOTE: 1 g/cm3 = 1,000 kg/m3, 1 Mpa = 1 N/mm2, 1kV/mm = 1 MV/m
       
Statement:      
Property data contained herein are typical values of resin for your reference and comparison purposes only. PRIOR will not provide any legally binding guarantee of certain properties, or any suitability. 


 

Contact us if you need more details on China Plastic Engineering Industry HDPE Sheet. We are ready to answer your questions on packaging, logistics, certification or any other aspects about China HDPE Sheet、China Polyethylene Plate. If these products fail to match your need, please contact us and we would like to provide relevant information.
  • Five Problems in the Plastic Mold Industry in China

    (1) Unbalanced development and lower overall product quality Although the products of individual companies have reached or approached the international advanced level, overall, the precision of the mold, the roughness of the cavity surface, the production cycle, and the life-span are indicators of advanced foreign...

  • Portable Plastic Welder for HDPE Sheet and Pipeline Joint

    Model NO.: hj-30b Power: Electric Material: PE Type: Plastic Welders Current: Inverter Current Voltage: 220V 50Hz Character: Compact Design, Light in Weight Trademark: HSD Transport Package: Standard Package Specification: EN253, EN448, EN728, ISO1133, ISO8501-1. ISO9001 Origin: Qingdao China HS Code: 8468800000 Model NO.:...

Product Categories : HDPE Sheet&Rod

Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters