Model No.: PR-HDPE-1
HDPE, the full name is high density polyethylene. The higher density improves its tensile strength ,surface hardness and heat deflection temperature. It is widely used because of its good impact resistance, nice chemical resistance, low water absorption and good resistance to UV.
-Good fatigue and wear resistance
-Super low water absorption
-Good surface smoothness
-Good protection against stress cracking
-Low steam permeability
-Good electrical insulation
1.Furnitures, doors ,windows ,chopping boards
2.Water storage box
Technical Data Sheet
|Water absorption 24hrs||ISO 62||%||0.01|
|Heat deflection temperature - HDT/A||ISO 75-2||ºC||55|
|Min. service temperature||ºC||-30|
|Max. service temperature-Long Term||ºC||90|
|Thermal conductivity at 23 ºC||DIN 11359||W/(K*m)||0.42|
|Coefficient of linear thermal expansion||ISO 11359||10-4*K-1||1.5|
|Flammability Rating(6mm thickness)||UL 94||-||HB|
|III.Mechanical Properties at 23ºC|
|Tensile strength at yield||ISO 527-2||MPa||27|
|Tensile strength at break||ISO 527-2||Mpa||35|
|Elongation at break||ISO 527-2||%||700|
|Modulus of elasticity after tensile test||ISO 527-2||MPa||1,000|
|Modulus of elasticity after flexural test||ISO 178||MPa||1,000|
|Hardness - Shore D||DIN 53505||64|
|Charpy impact strength||ISO 179||kJ/m2||N. B.|
|Friction coefficient||DIN 53375||0.3|
|IV.Electrical Properties at 23ºC|
|Dielectric constant at 1 MHz||IEC 60250||106Hz||2.3|
|Dielectric loss factor at 1 MHz||IEC 60250||106Hz||3.1|
|Volume resistively||IEC 60093||Ohm (Ω) * cm||>1016|
|Surface resisively||IEC 60093||Ohm (Ω)||>1015|
|Dielectric strength||IEC 60243-1||kV/mm||17|
|NOTE: 1 g/cm3 = 1,000 kg/m3, 1 Mpa = 1 N/mm2, 1kV/mm = 1 MV/m|
|Property data contained herein are typical values of resin for your reference and comparison purposes only. PRIOR will not provide any legally binding guarantee of certain properties, or any suitability.|
Contact us if you need more details on HDPE Sheet. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Polyethylene Plate、Pe Sheet. If these products fail to match your need, please contact us and we would like to provide relevant information.
Model NO.: PNDS Application: HDPE Pipe Shredder Shaft Design: Single Shaft Motor Power: 90-180kw Motor Brand: Siemens Shredder Blade Material: D2 Screen Mesh: 40mm Power Source: 380V 50Hz PLC Control: Optional Capacity: 500-5000kg/H Trademark: wanrooetech Transport Package: Wooden Case Specification: CE Origin:...
Model NO.: DX roll forming machine Control System: PLC Rolller: High Grade 45# Steel Froming Steps: 13 Hydraulic Pump Station: 4kw Motor Power: 5.5kw Chain: 1inch Cutter: Cr12 Middle Plate: 14mm Shaft: 75mm Trademark: DIXIN Transport Package: Nude, Covered with Plastic Film Specification: CE, SGS Origin: Botou, Hebei, China...
Model NO.: SL2, SL3, SL 6, etc Coil Material: Cr, Hr, Gi, Ss, etc Slitting Speed: 0-200m/Min Slits Tolerance: 0.02mm Coil Weight: 5-35 Tons Edge Scrap: Rewinded Electrical Elements: Chint PLC: Mitsubishi, or Siemens DC Motor Controller: Eurotherm Shipment: in FCL Containers Warranty: One Year Trademark: HS Transport...
The new sheet produced by Nanjing Owens Corning Extruded Foam Sheet Co., Ltd., which is a rigid polystyrene extruded foam board, has attracted the attention of people in the industry recently. Nanjing Owens Corning Company is Owens Corning's only company specializing in the production of extruded foam board in China,...
Product Categories : HDPE Sheet&Rod