Insulation Paper
(2)
Ceramic Fiber
(8)
Asbestos Fiber
(13)
Fiberglass
(7)
Mica Products
(13)
Gasket Sheets
(8)
Gaskets
(5)
Irrigation Products
(138)
Garden Nozzles
(1)
Plastic Valves
(13)
PVC Pipe Fittings
(24)
Electric Valve
(4)
SC connector has offers a push-pull locking mechanism, which is very flexible, but a high repeatability and low insertion loss. He was quickly replaced existing connections such as ST and SMA connectors are currently most popular ceramic fibers used in asbestos fiber optic communication industry.
Because of its push-pull snap-in locking, SC connector has the advantage duplexibility important support send / receive channels in a unit of the optical ceramic fiber connection.
SC connectors used ceramic rings, so that they can provide accurate ceramic fiber alignment and high reliability. The ceramic tip is a cylindrical structure with a diameter of 2.5 mm and the asbestos fiber is fixed in a hole. The typical insertion loss of an SC connector is about 0.2 dB.
From the outside, the SC connector is to be found in a small square, after the plug is slightly tapered at the top. It uses spring retention to keep the plug in position when mated. The square and push / pull coupling mechanism to be used in applications with high density.
The SC connector can be coupled with a duplex outlet and power or duplex clip. In a number of important duplexes, the SC connector easily implemented a form of polarity matching adapter with optical asbestos fiber connection points or patch panels.
SC connector has been adopted by the TIA, that the official Ceramic Fiber Connection in TIA / EIA 568-A is recommended. In the standard, it says 568SC connector.
Duplex SC Connector version is gaining popularity in the networks and other applications, including full-duplex transmission. The connector is for single mode and multimode asbestos fiber. The SC connector has a packing density of excellent performance and exceptional costs.
