Find PA Sheet,Nylon Plate,Nylon Sheet on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Home > Products > Nylon Sheet&Rod > Corrosion Resistance Virgin Material Nylon PA66 Plate

Corrosion Resistance Virgin Material Nylon PA66 Plate

Basic Info

Model No.:  PR-NYLON-1

Product Description

Model NO.: PR-NYLON-1 Kind: Engineering Plastic Sheet Contraction Percentage: <0.4% Colors: White, Black, Blue,Green,etc Size: 1000*2000mm Fob Port: Shenzhen Small Order: Accepted Specification: SGS, RoHS HS Code: 3920920000 Material: Polyamide Water Absorption: 1.5%~3.5% Tensile Strength: (51~80)MPa Thickness: 6-100mm Density: 1.15g/cm3 Sample Availability: Yes Trademark: PRIOR Origin: China Corrosion resistance virgin material nylon PA66 Plate

Description
Nylon is the most widely used engineering plastic in the current market. With its good mechanical properties, wear resistance and self-lubricating function, it is widely used in the mechanical structures and spare parts .We can also fill the glass fiber and some other fillers to improve its properties, such as improving its rigidity, wear resistance and impact resistance.

Characteristics
-Excellent wear resistance
-Good sliding properties
-High strength and toughness
-Self-lubricating
-Resistant to oil, weak acid and alkali
-Shock absorption
-Noise absorption
-Good electrical properties

What's the difference between cast nylon and extruded nylon ?
The main difference is the manufacturing process. Cast nylon products are manufactured by a series of chemical reaction process. This allows products with extremely large dimensions and custom cast parts to be manufactured. Cast nylon owns better size stability and less water absorption. The crystallinity is greater so that wear resistance and machinability are better. Extruded absorbs more moisture and is thus tougher and has higher impact and vibration damping properties.

Applications
Gears
Gears made of nylon run quieter and wear longer without lubricating on processing equipment. (Prior materials: Bronze and steel)

Nozzle
MC nylon can save fabrication time and cost in this port cap and diffuser nozzle application. It only weighs only 1/7 the former parts making parts easier to handle and install. (Prior material: Stainless Steel)

Wear Pads
Wear pads made of nylon are light weight, able to bear heavy loads, are non-abrasive to mating surfaces. (Prior material: Bronze and cast iron covered with UHMW-PE)

Rollers, Wheels, Wear Components
Nylon offers better wear resistance, compressive strength and fatigue resistance than other materials in a variety of wear applications. (Prior materials: Steel, Aluminium, UHMW-PE, Injection Molded Nylon)



Technical Data Sheet
PROPERTIES Test Method Unit Value
I.Physical Properties
Density ISO 1183 g/cm3 1.15~1.2
Water absorption 24hrs ISO 62 % 2.5
II.Thermal Properties
Heat deflection temperature - HDT/A ISO 75A ºC 95
Min. service temperature   ºC -30
Max. service temperature   ºC 105
Thermal conductivity at 23 ºC DIN 11359 W/(K*m) 0.23
Coefficient of linear thermal expansion ISO 11359 10-4*K-1 0.8
Flammability Rating(6mm thickness) UL 94 - HB
III.Mechanical Properties at 23ºC
Tensile strength at yield ISO 527-2 MPa 80
Tensile strength at break ISO 527-2 Mpa -
Elongation at break ISO 527-2 % 3
Modulus of elasticity after tensile test ISO 527-2 MPa 3,300
Modulus of elasticity after flexural test ISO 178 MPa -
Hardness - Shore D DIN 53505   84
Charpy impact strength ISO 179 kJ/m2 N. B.
Friction coefficient DIN 53375   0.36
IV.Electrical Properties  at 23ºC
Dielectric constant at 1 MHz IEC 60250 106Hz 3.70
Dielectric loss factor at 1 MHz IEC 60250 106Hz 0.03
Volume resistively IEC 60093 Ohm (Ω) * cm ≥1015
Surface resisively IEC 60093 Ohm (Ω) ≥1013
Dielectric strength IEC 60243-1 kV/mm 50
NOTE: 1 g/cm3 = 1,000 kg/m3, 1 Mpa = 1 N/mm2, 1kV/mm = 1 MV/m
       
Statement:      
Property data contained herein are typical values of resin for your reference and comparison purposes only. PRIOR will not provide any legally binding guarantee of certain properties, or any suitability. 

Contact us if you need more details on PA Sheet. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Nylon Plate、Nylon Sheet. If these products fail to match your need, please contact us and we would like to provide relevant information.
  • Fluorine plastic pump corrosion resistance and selection of reference

    First, the selection of fluorine plastic pump should consider the following questions: 1, corrosion resistance: For a long time, corrosion is one of the most headache hazards of chemical equipment, a slight carelessness, ranging from damage to equipment, heavy cause accidents and even lead to accidents . According to the...

  • PE Rope Made From Virgin Material

    Model NO.: SDSRPE1 Type: Twist Rope Trademark: Customized Specification: 3 or 4 strands HS Code: 5607490020 Usage: Packaging, Agriculture, Shipping, Security, Decoration Material: Pe Transport Package: Packing in Coil, Hank, Bundle, Reel Origin: China SHANDONG SUNRISE PLASTICS is a professional manufacturer for all kinds of...

  • High Quanlity Corrosion Resistance Hot Dipped Zinc Chain Link Fence

    Model NO.: factory Application: Fence Mesh, Protecting Mesh, Decorative Mesh, Construction Wire Mesh, Cages, Screen, Window Curtain, Barbecue Wire Mesh, Stadium Security Fence Weave Technique: Plain Weave Products Name: Chain Link Fence Wire Dia: 2mm-5mm Width: 0.5m-5m Export Markets: Global Trademark: Chang Te...

  • Anti-corrosion resistance features

    1. Anti-corrosion thermal resistance adopts multi-layer anti-corrosion (anti-corrosion thermal-resistance anti-corrosion layer protection tube is usually a thick-walled 316L or 904L steel tube with integral sintered PTFE layer and wear-resistant anti-corrosion layer) structure, anti-corrosion effect and service life by many...

Product Categories : Nylon Sheet&Rod

Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters

Premium Related Products