Model No.: PR-NYLON-1
Nylon is the most widely used engineering plastic in the current market. With its good mechanical properties, wear resistance and self-lubricating function, it is widely used in the mechanical structures and spare parts .We can also fill the glass fiber and some other fillers to improve its properties, such as improving its rigidity, wear resistance and impact resistance.
-Excellent wear resistance
-Good sliding properties
-High strength and toughness
-Resistant to oil, weak acid and alkali
-Good electrical properties
What's the difference between cast nylon and extruded nylon ?
The main difference is the manufacturing process. Cast nylon products are manufactured by a series of chemical reaction process. This allows products with extremely large dimensions and custom cast parts to be manufactured. Cast nylon owns better size stability and less water absorption. The crystallinity is greater so that wear resistance and machinability are better. Extruded absorbs more moisture and is thus tougher and has higher impact and vibration damping properties.
Gears made of nylon run quieter and wear longer without lubricating on processing equipment. (Prior materials: Bronze and steel)
MC nylon can save fabrication time and cost in this port cap and diffuser nozzle application. It only weighs only 1/7 the former parts making parts easier to handle and install. (Prior material: Stainless Steel)
Wear pads made of nylon are light weight, able to bear heavy loads, are non-abrasive to mating surfaces. (Prior material: Bronze and cast iron covered with UHMW-PE)
Rollers, Wheels, Wear Components
Nylon offers better wear resistance, compressive strength and fatigue resistance than other materials in a variety of wear applications. (Prior materials: Steel, Aluminium, UHMW-PE, Injection Molded Nylon)
Technical Data Sheet
|Water absorption 24hrs||ISO 62||%||2.5|
|Heat deflection temperature - HDT/A||ISO 75A||ºC||95|
|Min. service temperature||ºC||-30|
|Max. service temperature||ºC||105|
|Thermal conductivity at 23 ºC||DIN 11359||W/(K*m)||0.23|
|Coefficient of linear thermal expansion||ISO 11359||10-4*K-1||0.8|
|Flammability Rating(6mm thickness)||UL 94||-||HB|
|III.Mechanical Properties at 23ºC|
|Tensile strength at yield||ISO 527-2||MPa||80|
|Tensile strength at break||ISO 527-2||Mpa||-|
|Elongation at break||ISO 527-2||%||3|
|Modulus of elasticity after tensile test||ISO 527-2||MPa||3,300|
|Modulus of elasticity after flexural test||ISO 178||MPa||-|
|Hardness - Shore D||DIN 53505||84|
|Charpy impact strength||ISO 179||kJ/m2||N. B.|
|Friction coefficient||DIN 53375||0.36|
|IV.Electrical Properties at 23ºC|
|Dielectric constant at 1 MHz||IEC 60250||106Hz||3.70|
|Dielectric loss factor at 1 MHz||IEC 60250||106Hz||0.03|
|Volume resistively||IEC 60093||Ohm (Ω) * cm||≥1015|
|Surface resisively||IEC 60093||Ohm (Ω)||≥1013|
|Dielectric strength||IEC 60243-1||kV/mm||50|
|NOTE: 1 g/cm3 = 1,000 kg/m3, 1 Mpa = 1 N/mm2, 1kV/mm = 1 MV/m|
|Property data contained herein are typical values of resin for your reference and comparison purposes only. PRIOR will not provide any legally binding guarantee of certain properties, or any suitability.|
Model NO.: KEXINDA Trademark: KEXINDA Transport Package: Naked Specification: 7000× 1400× 1500mm Origin: China High Quality Double Layer building used colored steel wall Roofing Sheet cold bending Roll Forming Machine with CE Product Description ♦ MAIN PARAMETERS: ♦ PROCESS DRAWING: ♦ MACHINE PICTURES: ♦ DETAILED...
Model NO.: roofing sheet making machine Color: Blue Chain: 1 Inch Forming Steps: 23 Roller: High Grade 45# Steel Shaft: 75mm Material: Galvanized/Aluminum/Color Steel Sheet Thickness: 0.3-0.8mm Middle Plate: 14mm Hydraulic System: PLC Computer Electric Motor: 4kw Trademark: DIXIN Transport Package: Nude, Covered with...
Trademark: kexinda Transport Package: Container Specification: 8800*1500*1600mm Origin: Hebei HS Code: 8455221000 Model:780 roll froming machine All technical parameters can be changed,according to user s need. Technical parameter: 1.The material of shaft is 45# steel and φ80mm. 2.Frame using 350mm channels. 3.The chain and...
Model NO.: HKY-roll forming machine Voltage: 380V Thickness Range: 0.2mm-1.0mm Type: Roll Forming Machine Trademark: HKY Transport Package: Export Packing Specification: 9.2*1.5*1.4M Origin: China HS Code: 8455 Steel wall panel forming machineOther name: cold roll forming machine, steel tile roll forming machine. Components...
Product Categories : Nylon Sheet&Rod
Premium Related Products