Model No.: PR-POM-1
POM is a kind of engineering plastic with good mechanical properties. POM together with UHMW PE, Nylon, PTFE are known as four most abrasion resistant plastics. It has almost the same rigidity as metal, so it's an ideal replacement material of copper, cast zinc, steel, aluminum and other metal materials. We are able to produce POM products without bubbles or cracks.
-High surface hardness
-Good wear resistance
-Nice self-lubricating properties
-Good dimensional stability
-Low water absorption
-Work under the temperature of -40-100 centidegrees
POM bearings own excellent stability and good wear resistance in various kinds of moist environments.
POM has high stiffness and rigidity, good self-lubricating properties. So it has taken the place of metal gears in many applications. (Prior materials: Bronze, Stainless Steel)
Guide rollers machined from POM rod operate smoothly and reliably in lift gate systems used to load cargo onto truck beds. (Prior materials: Cast Iron, Cast Aluminium)
With excellent fatigue and impact resistance, POM is a suitable material of continuously loaded structural keel for prosthetic device. (Prior materials: Nylon, PU)
Low coefficient friction, wear resistant, self-lubricating, no need for lubricating oil.
Technical Data Sheet
|Water absorption 24hrs||ISO 62||%||< 0.3|
|Heat deflection temperature - HDT/A||ISO 75A||ºC||110|
|Min. service temperature||ºC||-40|
|Max. service temperature||ºC||100|
|Thermal conductivity at 23 ºC||DIN 11359||W/(K*m)||0.31|
|Coefficient of linear thermal expansion||ISO 11359||10-4*K-1||1.2|
|Flammability Rating(6mm thickness)||UL 94||-||HB|
|III.Mechanical Properties at 23ºC|
|Tensile strength at yield||ISO 527-2||MPa||63|
|Tensile strength at break||ISO 527-2||Mpa||-|
|Elongation at break||ISO 527-2||%||31|
|Modulus of elasticity after tensile test||ISO 527-2||MPa||2,700|
|Modulus of elasticity after flexural test||ISO 178||MPa||-|
|Hardness - Shore D||DIN 53505||83|
|Charpy impact strength||ISO 179||kJ/m2||N. B.|
|Friction coefficient||DIN 53375||0.35|
|IV.Electrical Properties at 23ºC|
|Dielectric constant at 1 MHz||IEC 60250||106Hz||3.8|
|Dielectric loss factor at 1 MHz||IEC 60250||106Hz||0.005|
|Volume resistively||IEC 60093||Ohm (Ω) * cm||>1013|
|Surface resisively||IEC 60093||Ohm (Ω)||>1013|
|Dielectric strength||IEC 60243-1||kV/mm||40|
|NOTE: 1 g/cm3 = 1,000 kg/m3, 1 Mpa = 1 N/mm2, 1kV/mm = 1 MV/m|
|Property data contained herein are typical values of resin for your reference and comparison purposes only. PRIOR will not provide any legally binding guarantee of certain properties, or any suitability.|
Model NO.: SJ-120/33 Board Layers: Multilayer Automation: Automatic Certification: CE, ISO9001:2008 Condition: New Product Thickness: 2-11mm Machine Length: 25-28m Transport Package: Suitable for Sea Shipment Origin: Qingdao, China Product Type: PP Board Screw No.: Single-screw Computerized: Computerized Customized:...
Model NO.: AF-D1000 Customized: Customized Type: Hydraulic Machine Size: 7m*1.4m*1.4m Machine Weight: About 4.5 Tons Material Feeding Width: 1000mm Material Thickness: 0.3-0.8mm Control System: PLC Transport Package: Standard for Shipping Origin: Shanghai Certification: CE Automatic Grade: Automatic Product Name:...
Model NO.: TPS-CTCX840 Guarantee: Two Years Steel Sheet Thickness: 0.3~1.0 mm Supplied Power Condition: as Per The Customer′s Country Standard Time of Delicery: 45 Days Packing Method: Plywood Box Installation & Training: Provide Trademark: SHILONG Specification: CE, ISO, CCC, Origin: Jiangsu HS Code: 84748010 China...
Model NO.: RF-CR Machine Weight: 4t Total Power: 6kw Material: Gi/ Gp/ Galvalume Sheet Machine Size: 5000X 2000X1650 Trademark: Suhang Transport Package: Film and Steel Specification: CE, SGS, ISO9001: 2008 Origin: Wuxi, Jiangsu HS Code: 8455229090 Galvanized Thin Board Barrel Corrugated Roof Sheet Making Machine 1....
Product Categories : POM Sheet&Rod