Find Pom Sheet, Delrin Sheet, Engineering Plastic on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Home > Products > PTFE Sheet&Rod > POM plus 30% PTFE sheet rod

POM plus 30% PTFE sheet rod

  • POM plus 30% PTFE sheet rod
  • POM plus 30% PTFE sheet rod
  • POM plus 30% PTFE sheet rod
  • POM plus 30% PTFE sheet rod

POM plus 30% PTFE sheet rod

    Min. Order: 1 Piece/Pieces
    Packaging: Export carton pallet
    Brand: HONY
    Transportation: Ocean,Land,Air
    Place of Origin: China
    Supply Ability: Enough
    Certificate: SGS RoHS Reach ISO9001
    Port: Shenzhen,Guangzhou,Hongkong

Basic Info

Model No.: HONYPOM-30PTFE

Product Description

Production description: HONYPOM-30PTFE is made by blending POM and Teflon materials, which retains most of the strength of POM. After the addition of Teflon, the material properties change, softening, less rigidity, and smoother surface.

Product features: low friction coefficient, wear resistance, basically no creeping phenomenon, good creep resistance; high impact strength even at low temperatures; very good dimensional stability; sliding performance is better than pure POM, excellent mechanical properties; Physiologically inert, suitable for contact with food.

Product shortcomings: not resistant to strong acids, especially mineral acids, not resistant to ultraviolet rays, and not fireproof


Extruded Acetal Pom Board is blended with other polymers with polyoxymethylene as the main body. The blended polymer made is called polyoxymethylene alloy. In recent years, with the continuous development of high-efficiency compatibilization technology, the production and application of POM alloys have developed rapidly. Advantages: Among all self-lubricating Engineering Plastics, polytetraethylene (PTFE) has the highest friction coefficient. Adding PTFE to POM to produce polyoxymethylene alloy* can significantly reduce the friction factor of POM, improve the level of abrasion resistance and self-lubrication. Disadvantages: The mechanical strength and impact toughness have been reduced.


HONYPOM-30PTFE board application:

POM/PTFE alloy is suitable for manufacturing oil-free self-lubricating gears, precision gears, computer bearings, bearing rings, seals, cams, machinery industry, electronic communication equipment parts, etc. POM+PTFE is uniformly mixed with TEFLON fiber in DELRIN polyacetal resin. It retains most of the inherent strength of DELRIN. Some properties are changed due to TEFLON fiber. It is slightly softer, less rigid, and more slippery than pure polyacetal resin. It is suitable for making sliding parts, precision mechanical parts and water-resistant parts, such as bearings, gears, impellers, cams, and bushings. Materials for jigs, washers, guide rails, handles, handles, etc.


Application areas: bearings, gears, impellers, cams, bushes, washers, guide rails, handles, handles, etc., materials for fixtures.


POM PTFE


Acetal Pom Sheet Color: white, black, brown, dark brown

Types: Rods, Sheets, Plates, Tubes, Profiles


HONYPOM-30PTFE Technical Data Sheet


Property item Testing method Unit Testing data
Mechanical properties
Density ASTM D792 g/cm3 1.50
Tensile strength at yield
ASTM D638 Mpa 55
Elongation at break
ASTM D638 % 30
Bending strength
ASTM 790 Mpa 80
Flexural modulus
ASTM 790 Mpa 1700
Shore Hardness
ASTM D2240 D 80
Impact strength
ASTM D256 J/M 40
Thermal performance
Melting point
DSC 175
Heat distortion temperature
ASTM D648 130
Long-term working temperature
- 100
Short-term working temperature
- 150
Thermal conductivity
DIN 52612-1 W/(K-M) 0.31
Coefficient of linear expansion
ASTM D696 10-5-1/K 10
Electrical properties
Dielectric strength
ASTM D150 KV-mm 19
Dielectric loss coefficient
ASTM D150 - 0.007
Volume resistance
ASTM D257 Ω.cm

1014

Surface resistance
ASTM D257 Ω

1016

Dielectric constant
ASTM D149 - 3.6
Chemical properties
Balanced water absorption
23℃ 60%RH % 0.26
Acid resistance
23℃ 60%RH
+
Alkali resistance


+
Acid and alkali water resistance


+
Chloric acid and alkali resistance


0
Resistant to aromatic compounds


+
Copper resistance

23℃ 60%RH


+
Hot water resistance
23℃ 60%RH
+
Other properties
Combustibility
UL 94
HB
Stickiness


+
toxic free and safe
EEC 90/128 FDA
+
Coefficient of friction
DIN 53375
0.35
anti-UV
-
0

Remark:

1."+" Tolerable , “-”Intolerable , "0" Depends on the situation

2. The above data is obtained from raw material test data, which is not completely consistent with the performance of the finished product, and the uniqueness of the data is not guaranteed


POM SHEET

Hony Engineering Plastics Co.,Ltd.

 

HONY Engineering Plastics Co., Ltd is a national high-technology enterprise integrating R&D, production and sell a wide range of engineering plastics in semi-finished format such as sheets, plates , rods, tubes, flat bars, profiles and finishing machining right through to precise machined parts. Value added services include: Saw Cutting, Laser Cutting & Etching, Routing, Welding, Drilling, Bending, Forming, Polishing, Gluing, Injection Molding & CNC Milling. Since its inception, the company has been adhering to the philosophy of technical service customers, and has assembled a professional technical team with more than ten years of experience in precision processing of plastic semi-finished products and plastics, dedicated to aerospace, medical equipment, semiconductor industry, communications, mechanical equipment manufacturing, hardware and electrical appliances, the ship industry, mining machinery, petrochemical machinery and many other industries. To provide customers with one-stop service, the links include pre-sale material selection, integrated sales processing solutions, and after-sales tracking products.


Its registered brand is HONY,HONYPRO,HONYPLAS,HONYESD,HONYFLUO. We always adhere to the principle of "low cost, high quality" to provide customers with customized solutions for engineering plastics, and to serve customers with high-quality products and technologies. Welcome to contact us, HONY will serve you wholeheartedly.


HONY Workshop have 2 axis, 3 axis, 4 axis, 5 axis with HAAZ machining center and SWISS machining center.

Company Info

  • Company Name: Hony Engineering Plastics Co.,Ltd.
  • Representative: ZOU SHU YA
  • Product/Service: Plastics Sheet , Plastics Rod , CNC Plastic Machined Parts , CNC Metal Machined Parts , Plastics Injection Molding , Antistatic Material
  • Capital (Million US $): 200万
  • Year Established: 2008
  • Total Annual Sales Volume (Million US $): Above US$100 Million
  • Export Percentage: 91% - 100%
  • Total Annual Purchase Volume (Million US $): Above US$100 Million
  • No. of Production Lines: 38
  • No. of R&D Staff: 11 -20 People
  • No. of QC Staff: 5 -10 People
  • OEM Services Provided: yes
  • Factory Size (Sq.meters): 10,000-30,000 square meters
  • Factory Location: 3rd Floor,Building 9,Wu Shi Gang Industry Zone,Dalang street,Longhua District,Shenzhen,Guangdong province,China
  • Contact Person: Ms. Tina
  • Tel: +86-755-21045157
Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters

Premium Related Products