High Quality Polypropylene PP Sheet

Model NO.: PR-PP-1 Kind: Engineering Plastic Sheet Contraction Percentage: ＜0.4% Thickness: 1-100mm FOB Port: Shenzhen Small Order: Accepted Transport Package: by Plastic Pallet or Wooden Pallet Origin: China Material: PP Water Absorption: ＜0.01% Tensile Strength: （30~40）MPa Size: 1000*2000mm Sample Availability: Yes Trademark: PRIOR Specification: SGS, RoHS HS Code: 3920209090 High quality corrugated polypropylene Pp Sheet

Description
PP is a non-toxic,non smell ,low density material .It has better strength ,rigidity and heat resistance than PE.Its operating temperature is about 100ºC.It has outstanding electrical properties and high frequency insulating properties.As a result ,it is suitable to make the general industrial parts ,chemical resistant parts and insulation parts .

Characteristics
-Good tensile strength
-Good fatigue resistance
-Nice chemical resistance
-Good electrical properties
-Good insulation 
-Low density
-Environmental protective
-Food safe
-Can boil in high temperature

PP Applications
1.Chemical resistant parts
2.Insulation parts
3.Home appliances shell, wire and cable
4.Floor of swimming pool




Technical Data Sheet

PROPERTIES	Test Method	Unit	Value
I.Physical Properties
Density	ISO 1183	g/cm3	0.91
Water absorption 24hrs	ISO 62	%	0.01
II.Thermal Properties
Heat deflection temperature - HDT/A	ISO 75A	ºC	65
Min. service temperature		ºC	-30
Max. service temperature		ºC	100
Thermal conductivity at 23 ºC	DIN 11359	W/(K*m)	0.22
Coefficient of linear thermal expansion	ISO 11359	10-4*K-1	1.7
Flammability Rating(6mm thickness)	UL 94	-	HB
III.Mechanical Properties at 23ºC
Tensile strength at yield	ISO 527-2	MPa	30
Tensile strength at break	ISO 527-2	Mpa	-
Elongation at break	ISO 527-2	%	50
Modulus of elasticity after tensile test	ISO 527-2	MPa	1,600
Modulus of elasticity after flexural test	ISO 178	MPa	-
Hardness - Shore D	DIN 53505		70
Charpy impact strength	ISO 179	kJ/m2	N. B.
Friction coefficient	DIN 53375		0.3
IV.Electrical Properties  at 23ºC
Dielectric constant at 1 MHz	IEC 60250	106Hz	2.3
Dielectric loss factor at 1 MHz	IEC 60250	106Hz	0.0002
Volume resistively	IEC 60093	Ohm (Ω) * cm	>1016
Surface resisively	IEC 60093	Ohm (Ω)	>1013
Dielectric strength	IEC 60243-1	kV/mm	40
NOTE: 1 g/cm3 = 1,000 kg/m3, 1 Mpa = 1 N/mm2, 1kV/mm = 1 MV/m
Statement:
Property data contained herein are typical values of resin for your reference and comparison purposes only. PRIOR will not provide any legally binding guarantee of certain properties, or any suitability.

 

Contact us if you need more details on PP Sheet. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Polypropylene Sheet、Plastic Sheet. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : PP Sheet&Rod