Model No.: PR-PP-1
PP is a non-toxic,non smell ,low density material .It has better strength ,rigidity and heat resistance than PE.Its operating temperature is about 100ºC.It has outstanding electrical properties and high frequency insulating properties.As a result ,it is suitable to make the general industrial parts ,chemical resistant parts and insulation parts .
-Good tensile strength
-Good fatigue resistance
-Nice chemical resistance
-Good electrical properties
-Can boil in high temperature
Chemical resistant parts
Home appliances shell, wire and cable
Floor of swimming pool
Technical Data Sheet
|Water absorption 24hrs||ISO 62||%||0.01|
|Heat deflection temperature - HDT/A||ISO 75A||ºC||65|
|Min. service temperature||ºC||-30|
|Max. service temperature||ºC||100|
|Thermal conductivity at 23 ºC||DIN 11359||W/(K*m)||0.22|
|Coefficient of linear thermal expansion||ISO 11359||10-4*K-1||1.7|
|Flammability Rating(6mm thickness)||UL 94||-||HB|
|III.Mechanical Properties at 23ºC|
|Tensile strength at yield||ISO 527-2||MPa||30|
|Tensile strength at break||ISO 527-2||Mpa||-|
|Elongation at break||ISO 527-2||%||50|
|Modulus of elasticity after tensile test||ISO 527-2||MPa||1,600|
|Modulus of elasticity after flexural test||ISO 178||MPa||-|
|Hardness - Shore D||DIN 53505||70|
|Charpy impact strength||ISO 179||kJ/m2||N. B.|
|Friction coefficient||DIN 53375||0.3|
|IV.Electrical Properties at 23ºC|
|Dielectric constant at 1 MHz||IEC 60250||106Hz||2.3|
|Dielectric loss factor at 1 MHz||IEC 60250||106Hz||0.0002|
|Volume resistively||IEC 60093||Ohm (Ω) * cm||>1016|
|Surface resisively||IEC 60093||Ohm (Ω)||>1013|
|Dielectric strength||IEC 60243-1||kV/mm||40|
|NOTE: 1 g/cm3 = 1,000 kg/m3, 1 Mpa = 1 N/mm2, 1kV/mm = 1 MV/m|
|Property data contained herein are typical values of resin for your reference and comparison purposes only. PRIOR will not provide any legally binding guarantee of certain properties, or any suitability.|
Pet Plastic Dehumidifying Dryer With Loader Features: NHD series direct-drive hopper dryers are the most efficient and rapidly economical and applied machine to dry the plastics material, it can dry the wet material for package, transportation of recycle, all the models can choose to add the 24-hour...
Hot-Air Circulating 50kg Plastic Hopper Dryer for Injection Machine1. Using dispersed air of high-performance air diffusion device, to maintain uniformity of dryingTemperature presses to improve drying efficiency2. Unique curved design of hot air tube, to avoid accumulation of powder layer at the...
PLastic DryerNHD series direct-drive hopper dryers are the most efficient and rapidly economical and applied machine to dry the plastics material, it can dry the wet material for package, transportation of recycle, all the models can choose to add the 24-hour timer, a week timer or microcomputer...
Model NO.: IV-CB087 Usage: Cosmetics, Chemical, Cosmetic Packaging Shape: Square Bottle OEM/ODM Service: Yes Transport Package: Exporting Carton Origin: Guangzhou, China Material: Plastic Sealing Type: Pump Sprayer, Screw Cap Plastic Type: PE Trademark: INVAN Specification: 500ml HS Code: 3923300000 Hot Selling Cosmetic...
Product Categories : PP Sheet&Rod