pressed PTFE rod

Specifications pressed PTFE Rod:

1.Flat and tidy surface, no defects, crevices or separations.

2.Any sizes according to customer's demand

100% Pure Teflon rod:   Ptfe Rod: there are three kinds of PTFE rods that we can offer: 2mm ~ 4mm Diameter great PTFE rod we select dispersion polymerization PTFE resin through paste push process to make. 5mm ~ 120mm diameter great PTFE rod we choose suspended PTFE resins through plunger extrusion process to produce. 55mm ~ 300mm diameter PTFE rods is made by mould process.   Features of PTFE rod:   PTFE rod has excellent chemical-resistant, not aging, electric insulation, and low friction coefficient properties. It can work in the temperature of minus180~ above 260°C, under no load cases.   

TYPES	Diameter(mm)	Length(mm)
pressed rod	2~4	produced under requirements
extruded rod	5~120	500~3000
die pressed rod	55~300	100~300

  Property of PTFE rod: 

Item	Unit	Result
Apparent density	g/cm3	2.1-2.3
flexural strength	Mpa	11-14
Tensile strength	MPa	21-28
friction coefficient	/	0.04
water absorption	%	<19
dielectric strength	KV/mm	10

    Application: PTFE rod can be used as electrical insulating part, gasket, non-adhesive material etc.       

Contact us if you need more details on Ptfe Rod. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Plastic Ptfe Rod、Teflon Rod. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : PTFE Rod